Fluoropolymer Manufacturer
High Performance Fluoropolymer Products
We manufacture semi-finished, finished, and custom fluoropolymer components made from PTFE, FEP, PVDF, and PFA materials for demanding industries worldwide.
About Company
Professional Fluoropolymers Manufacturer
We are a leading manufacturer specializing in the production of high-performance semi-finished and finished fluoropolymer plastics.
We offer an extensive array of products divided into four main series: PTFE, PEP, PVDF, and PFA.
Advanced manufacturing tech and strict quality control.
Deep expertise in fluoropolymer chemistry.
Cost-effective solutions with reliable supply.
Compliance with ISO, RoHS, and REACH standards.
Our Clients
Trusted by Global Teams
We provide reliable fluoropolymer supply for manufacturing, electronics, energy, and medical industries worldwide.
PTFE Products
Linear polymer, purely carbon-fluorine backbone
- Exceptional chemical resistance
- Extremely low friction coefficient (non-stick properties)
- High-temperature resistance (up to 260°C)
- Excellent dielectric properties
- Non-reactive to most chemicals
- Virgin or filler addition
- Diameter: 10mm - 350mm
- Length: Cut-to-size
- Extruded / Molded
- OD: 0.6mm - 400mm
- ID: 0.3mm - 375mm
- Flexible / Semi-rigid structure
- Extruded
- Thickness: 0.5mm - 300mm
- Skived / Molded
- Virgin or filler addition
- Adhesive-backed, or etched
- Thickness: 0.01mm - 6.0mm
- Max. 1275mm width
- Custom cut-length
- Skiving process
FEP Products
Copolymer with alternating TFE and HFP units
- Similar chemical resistance to PTFE but with better flexibility
- Lower maximum temperature resistance (up to 200°C)
- Higher transparency than PTFE
- Easily moldable and weldable
- Slightly higher friction than PTFE but still low
- OD: 0.5mm - 8.0mm
- ID: 0.3mm - 6.0mm
- Wall Thickness: 0.1mm - 1.0mm
- 0.012mm - 0.5mm thickness
- 50mm - 1200mm width
- Roll and sheet options
- Shrink ratios: 1.3:1, 1.6:1, 2:1
- ID Before Shrink: 3.0mm - 12.0mm
- ID After Shrink: 2.3mm - 7.5mm
PVDF Products
Homopolymer with CF2 and CH2 bonds
- High mechanical strength and toughness
- Good chemical resistance but lower than PTFE and FEP
- High-temperature resistance (up to 150°C)
- Excellent UV and radiation resistance
- High dielectric strength
- Easier to process than PTFE and FEP
- OD: 20mm - 225mm
- Wall Thickness: 2.0mm - 10.8mm
- Pressure: 1.0MPa, 1.6MPa, 2.0MPa
- Various fittings options
- Extruded / Molded
- 100% virgin or filler addition
- Thickness: 3mm - 50mm
- Max. Width: 1000mm
- Max. Length: 3000mm
- OD: 20mm - 400mm
- Wall Thickness: 1.9mm - 13.4mm
- Custom cutting-length
- Custom color and labeling
- Shrink Ratio: 2:1, 3:1
- OD: 1.2mm - 10.5mm
- ID: 0.6mm - 4.8mm
- Wall Thickness: 0.25mm - 0.3mm
Industries We Served
Fluoropolymers for Critical Applications
Fluoropolymers are widely used in industries requiring high-performance solutions, including semiconductor components, medical tubing, and chemical processing.
