PVDF Heat Shrink Tubing

Our PVDF tubing is engineered for high performance and durability, with an outer diameter (OD) range of 1.2mm to 10.5mm, an inner diameter (ID) of 0.6mm to 4.8mm, and a wall thickness of 0.25mm to 0.3mm.

Additionally, we provide tubing with shrink ratios of 2:1 and 3:1, ensuring a secure fit and insulation for critical applications.

  • OD: 1.2mm - 10.5mm
  • ID: 0.6mm - 4.8mm
  • Wall Thickness: 0.25mm - 0.3mm
  • Shrink Ratio: 2:1, 3:1
  • Length per Roll: 50m, 100m, 200m

Our PVDF Shrink Tubing Performance Characteristics

  Characteristic

Standard

Value

Tensile Strength

ASTM D2671

34.5MPa

Elongation at Break

ASTM D2671

1.5

Elongation at Break after Aging

250℃/168 Hours

1

Volumeresistance

IEC93

10^13Ω.cm

2:1 PVDF Heat Shrink Tubing

The 2:1 shrink ratio allows for effective insulation and protection of wires, connectors, and delicate components while maintaining flexibility and durability.

2 to 1 PVDF Heat Shrink Tubing

OD

ID

Wall Thickness

Length Per Roll

1.2mm

0.6mm

0.25±0.05mm

200m

1.6mm

0.8mm

0.25±0.05mm

200m

2.4mm

1.2mm

0.25±0.05mm

200m

3.2mm

1.6mm

0.25±0.05mm

100m

4.8mm

2.4mm

0.25±0.05mm

100m

6.4mm

3.2mm

0.25±0.05mm

100m

7.9mm

4.0mm

0.25±0.05mm

50m

9.5mm

4.8mm

0.30±0.05mm

50m

3:1 PVDF Heat Shrink Tubing

This increased shrink capability makes it ideal for applications requiring coverage over irregularly shaped or varying-diameter components.

3 to 1 PVDF Heat Shrink Tubing

OD

ID

Wall Thickness

Length Per Roll

3.2mm

1.0mm

0.25±0.05mm

100m

4.8mm

1.6mm

0.25±0.05mm

100m

6.4mm

2.2mm

0.25±0.05mm

100m

7.9mm

2.7mm

0.25±0.05mm

100m

10.5mm

3.5mm

0.25±0.05mm

100m

Contact Us Now

    FAQs

    Our PVDF heat shrink tubing comes with an outer diameter (OD) ranging from 1.2mm to 10.5mm, an inner diameter (ID) ranging from 0.6mm to 4.8mm, and wall thickness between 0.25mm and 0.3mm.

    We offer PVDF heat shrink tubing in roll lengths of 50m, 100m, and 200m to accommodate different project needs.

    Our PVDF heat shrink tubing is available in 2:1 and 3:1 shrink ratios, meaning it can shrink to half or one-third of its original diameter when heated.

    Yes, we can manufacture PVDF tubing in custom OD, ID, and wall thickness specifications based on customer requirements.

    Yes, we can produce colored PVDF tubing based on your specifications.